How to change BMW frontlower arm on replacement

 This article mainy introducesThis article mainly introduces  how to change  BMW frontlower arm on  replacement

         08.2022 BMW Rheingold ISTA+ 4.36.40 & ISTA-P 3.70 With PSdZData Full Download Service

Replacement:front lower arm-BMW E39.AUTODOC recommends:
·The replacement procedure is identical for the left and right lower control arms.
·All work should be done with the engine stopped.
REPLACEMENT:FRONT LOWER ARM-BMW E39.USE THE FOLLOWING PROCEDURE:

1Secure the wheels with chocks.

2Loosen the wheel mounting bolts.Use wheel impact socket #17.

3   Raise the front of the car and secure on supports.

4 4Unscrew the wheel bolts

                             BMW E-sysPlus 3.8+4.33.31 PsdZdata Lite

Replacement: front lower arm -BMW E39. Tip from AUTODOC:
· To avoid injury, hold up the wheel when unscrewing the bolts.

5  Remove the wheel.

6 Remove the control arm cover.

7Clean all joints of the arm.Use a wire brush.Use WD-40 spray.

8  Unscrew the ball joint fastening to the steering knuckle.Use a drive socket #22.Use a ratchet wrench.

gDisconnect the balljoint from the steering knuckle.Use a ball joint puller.

10Unscrew the lower fastener connecting the shock strut to the steering knuckle.Use a combination spanner #18.
Use a drive socket #16.Use a ratchet wrench.

11Unscrew the front arm fastener.Use a combination spanner #18.Use a drive socket #18.Use a ratchet wrench.

                                BMW FRM FRM2 FRM3 Dump Data File Download

 

12 Remove the front fastener of the control arm.